ProSoft Technology MVI71-MNET - Manual (Page 15)

Start Here MVI71-MNET ♦ PLC Platform
User Manual Modbus TCP/IP Interface Module
ProSoft Technology, Inc.
Page 15 of 109
June 23, 2009
1.7 Download the Sample Program to the Processor
To download the sample program from RSLogix 5 to the PLC processor:
Note: The key switch on the front of the PLC processor must be in the REM position.
1 If you are not already online to the processor, open the Communications
menu, and then choose Download. RSLogix will establish communication
with the processor.
2 Click the Download button to transfer the sample program to the processor.
3 When prompted, choose Computer to PLC
4 RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.