Bsap data element, Signal type, Version no – ProSoft Technology MVI56-BSAPS User Manual
Page 31: Signal addr, Hi db, Lo db, Hi al, Lo al, Hh al, Ll al

Module Configuration
MVI56-BSAPS ♦ ControlLogix Platform
Bristol Babcock Serial Slave Module
ProSoft Technology, Inc.
Page 31 of 83
September 22, 2008
2.6
[BSAP Data Element]
This section defines the database structure for the BSAP Data Element.
2.6.1 Signal
Type
0=Analog, 1=Logical, 2=String, 4=Analog w Alarm, 5=Logical w Alarm
2.6.2 Version
No
Version number is the version of each element that can be read by a master.
2.6.3 Signal
Addr
The Signal Address indicates the local address of each element that can be used
to read or write the signal by the local address.
2.6.4 Hi
DB
High Deadband (Also use for logical signal to indicate change of alarm state: 0 or
1)
2.6.5 Lo
DB
Low Deadband
2.6.6 Hi
AL
High Alarm Limit
2.6.7 Lo
AL
Low Alarm Limit
2.6.8 HH
AL
High-High Alarm Limit
2.6.9 LL
AL
Low-Low Alarm Limit
2.6.10 Base Name
Max char of Base Name = 8
2.6.11 Extension Name
Max char of Extension Name = 6