ProSoft Technology MVI56-BSAPS - Manual (Page 10)

MVI56-BSAPS ♦ ControlLogix Platform Start Here
Bristol Babcock Serial Slave Module
Page 10 of 83 ProSoft Technology, Inc.
September 22, 2008
ƒ 100 Mbytes of free hard disk space (or more based on application
requirements)
ƒ 256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024 × 768 recommended)
ƒ CD-ROM drive
ƒ ProSoft Configuration Builder, HyperTerminal or other terminal emulator
program.
Note: You can install the module in a local or remote rack. For remote rack installation, the module
requires EtherNet/IP or ControlNet communication with the processor.
1.2 Package Contents
The following components are included with your MVI56-BSAPS module, and are
all required for installation and configuration.
Important: Before beginning the installation, please verify that all of the following items are
present.
Qty. Part Name Part Number Part Description
1 MVI56-
BSAPS
Module MVI56-BSAPS Bristol Babcock Serial Slave Module
1 Cable Cable #15, RS232
Null Modem
For RS232 Connection to the CFG Port
3 Cable Cable #14, RJ45 to
DB9 Male Adapter
cable
For DB9 Connection to Module's Port
2 Adapter 1454-9F Two Adapters, DB9 Female to Screw Terminal. For
RS422 or RS485 Connections to Port 1 and 2 of the
Module
1 ProSoft
Solutions CD Contains sample programs, utilities and
documentation for the MVI56-BSAPS module.
If any of these components are missing, please contact ProSoft Technology
Support for replacement parts.