ProSoft Technology MVI69-103M - Manual (Page 60)

MVI69-103M ♦ CompactLogix or MicroLogix Platform Diagnostics and Troubleshooting
IEC 60870-5-103 Master Communication Module
Page 60 of 131 ProSoft Technology, Inc.
November 3, 2008
Opening the Port Configuration Menu
Press [P] from the IEC-103 Master Driver Menu to open the Port Configuration
menu. Use this command to view the port configuration information for each of
the application ports.
The Port Configuration Menu section has more information about the commands
on this menu.
Opening the Port Status Menu
Press [Q] from the IEC-103 Master Driver Menu to open the Port Status menu.
Use this command to verify the status of the master commands sent through the
port. If the display indicates a communication error, you should compare the
generated error code with the command error codes listed in the Appendices of
this manual.
The Port Status Menu section has more information about the commands on this
menu.
Opening the Session Configuration Menu
Press [S] to open the Session Configuration menu. Use this command to view
the session configuration data.
Refer to Session Configuration Menu (page 66) for more information about the
commands on this menu.