ProSoft Technology PS69-DPM - Manual (Page 97)

PS69-DPM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 97 of 130
October 1, 2014
5.2.3 PS69 LEDs
The LEDs as shown on the front panel will be used to indicate status information of the
PS69-DPM Master module. Each LED has a specific function during Run, configuration
download, and error indications. The following table shows the reaction of each during these
states for Master and Slave.
LED Color State Description
SYS Yellow Flashing cyclic at
1Hz Device is in boot loader mode and is waiting for firmware
download.
Yellow Flashing cyclic at
5Hz
Firmware download is in progress.
Yellow Flashing irregular (*) Hardware or runtime error detected.
Green Static On Communication is running. The device has established at
least one configured fieldbus connection.
Green Flashing cyclic at
5Hz No error in configuration found, communication is stopped.
Green Flashing irregular (*) Power Up: Configuration missing or faulty, device needs
commissioning.
Runtime: Host Watchdog timeout
Off Off Device has no power supply or hardware defect.
COM Green On Device is holding the PROFIBUS token and is able to transmit
telegrams.
Green Flashing acyclic (**) Device is sharing the PROFIBUS token with other master
devices in the PROFIBUS network.
Red On Device has found a communication problem to at least one
PROFIBUS-DP slave device or has detected a short circuit.
Off Off Device is not configured or has not received the Token
permission on the PROFIBUS network.
(*) 3 times fast at 5 Hz, 8 times between 0,5Hz and 1Hz
(**) between 0,5Hz and 100Hz