ProSoft Technology PS69-DPM - Manual (Page 105)

PS69-DPM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 105 of 130
October 1, 2014
6 Reference
In This Chapter
 Specifications .......................................................................................105
 PROFIBUS Functionality .....................................................................108
 RSLogix 5000 User Defined Data Types .............................................110
 Constructing a Bus Cable for PROFIBUS DP ......................................119
6.1 Specifications
The PS69 PROFIBUS DP Master module expands the functionality of Rockwell
Automation’s CompactLogix or MicroLogix family of processors to include PROFIBUS. This
module supports both I/O control and messaging, thus integrating DPV0 and DPV1
functionality into CompactLogix or MicroLogix.
The PS69-DPM is a CompactLogix or MicroLogix compatible, PROFIBUS certified module,
which enables controllers to communicate with a PROFIBUS network. The configuration and
diagnostic of the PROFIBUS system is done via the serial diagnostic interface of the module
using the System Configuration tool PROSOFT.fdt (SYCON.net). The data exchange
between controller and module is done via the I/O process data image using CompactLogix
or MicroLogix backplane technology.
DPV0 Services Supported
 Fail Safe Mode
 Global Control
 Sync and Freeze
 Watchdog
DPV1 Services Supported
 Read Request
 Write Request
 Alarm Indication
 Extended Device Diagnostics
6.1.1 General Specifications
 Single Slot – 1769 backplane compatible
 The module is recognized as an Input/Output module and has access to processor
memory for data transfer between processor and module
 Ladder Logic is used for data transfer between module and processor. Sample ladder
file included.
 Supports CompactLogix processors with 1769 I/O bus capability.
 Also supports MicroLogix 1500 LRP