ProSoft Technology PS69-DPM - Manual (Page 85)

PS69-DPM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 85 of 130
October 1, 2014
CIP Message Parameters for MSAC1_Write
Parameter Value Remarks
Message Type CIP Generic
Service Type Custom
Service Code 64 hex Service Code "Bridge Message"
Class 65 hex CIP Object "CIP_MSG_BRIDGE""
Instance 1
Attribute 0
Source Element WriteReq Reference to a Tag of type MSAC1_WRITE_REQUEST
Destination WriteCnf Reference to a Tag of type
MSAC1_WRITE_CONFIRM
Source Length 16 + x
( x = 1 .. 240 ) 16 = Constant part of the service MSAC1_WRITE_REQUEST
x = Number of data to be transferred
MSAL1M_Alarm_Res
The MSAL1M_Alarm_Res request is used by the master to send a DPV1 Alarm response to
a slave device. The message acknowledges the alarm when the appropriate indication
appears in theDPV1 Alarm Indication (page 67) area. The information mapped to this area
must be used in the DPV1 Alarm Response message in order to process the alarm properly.
The mapping of this information shall be as follows.
MSAL1M_ALARM_RES_REQUEST
Parameter Data Type Value Description
Reserved1 INT 0 Reserved
Reserved2 INT 0 Reserved
Reserved3 INT 0 Reserved
Command SINT 18 Command for Service MSAL1M_Alarm_Res
Reserved4 SINT 0 Reserved
DeviceAdr SINT 0.. 125 Address of the PROFIBUS Slave from DPV1 Alarm Indication
Register.
SlotNum SINT 0.. 254 Slot Number from DPV1 Alarm Indication Register.
SeqNum SINT 0.. 31 Sequence Number from DPV1 Alarm Indication Register.
AlarmType SINT 1 to 6,32 to
126 Alarm Type from DPV1 Alarm Indication Register.
AlarmSpec SINT 0..7 Alarm Spec from DPV1 Alarm Indication Register.
Reserved5 SINT 0 Reserved