ProSoft Technology PS69-DPM - Manual (Page 90)

Contents PS69-DPM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS DPV1 Master
Page 90 of 130 ProSoft Technology, Inc.
October 1, 2014
MSAL1M_Alarm_Res
Failure Significance Error source Help
86 hex = REJ_INT The alarm handler is not
initialized DEVICE No DPV1 capable device configured within the
card
87 hex = REJ_SRT The alarm handler is currently
stopped DEVICE No DPV1 capable slave device is in process
data exchange with the DEVICE. Check if
network is running
88 hex = REJ_ENA The alarm that shall be
acknowledged is not enabled in
slave parameter data
HOST Enable the corresponding alarm in slave
configuration data set
89 hex = REJ_NPD The alarm that shall be
acknowledge is not pending on
a MSAL1_Alarm_Res
HOST Check the parameter Alarm_Type and
Seq_Nr. Both must be equal to the
MSAL1_Alarm_ind parameter
9a hex = REJ_COM Unknown msg.b command HOST Correct the requested msg.b parameter of
message