PLANET UMG-1000 - Manual (Page 46)

46
8. Web Management - PBX
The UMG-1000 Series’s Private Branch Exchange (PBX) solution provides a private
telephone switching system that allows the telephone extensions to connect internally and
domestically, as well as externally and internationally. In most cases, a PBX is an
independent piece of equipment residing in an enterprise and is responsible for switching
calls between enterprise users. It allows these end users to place calls using a network
instead of the standard telephone infrastructure. The UMG-1000 Series supports the PBX,
enabling users to share a specific number of external phone lines, saving the added cost of
having an external phone line for each user. The UMG-1000 Series’s PBX allows end users
to place calls using a network instead of the standard telephone infrastructure. UMG-1000
Series’s PBX manages both the Plain Old Telephone Service (POTS) and Voice over IP
(VoIP) devices, utilizing VoIP accounts to connect them to telephone proxies. Devices
within the UMG-1000 Series’s PBX allow users to freely communicate with each other, thus
creating a cost-effective telephone environment.
8.1 IP PBX Overview
The UMG-1000 Series IP PBX overview displays the current IP PBX services status.
CALL FEATURE
This section indicates the status of the following PBX features.
VoIP Service: Displays the state of the IP PBX service, enabled or disabled.
Call Forwarding: Displays the state of the feature “Call Forwarding”, enabled or
disabled.
Call Pickup: Displays the state of the feature “Call Pickup”, enabled or disabled.
Call Parking: Displays the state of the feature “Call Parking”, enabled or
disabled.
Do Not Disturb: Displays the state of the feature “Do Not Disturb”, enabled or
disabled.
LCR: Display the state of the feature “LCR”, enabled or disabled.
Fax to Email Address: Displays the fax receiver’s email address