PLANET KVM-1610 - Manual (Page 18)

18
Mouse
Clicking
Turn on/off the keys of the
mouse for switching computer
functions.
OFF ON
Beeper
Sound Turn on/off the beeper sound
function.
ON OFF
Offline Skip
Set the offline skip function to
auto or manual.
Manual Auto
OSD
Language Select the language for the
OSD.
English
Francis, Deutsch,
Italian, Espino
Security
Level Select the security mode and
level.
None Low, High
Console Lock
Time *1
The lock time of console port. 5 Min
1Min, 3Min,
10Min, 30Min,
60Min
*1: You can select this option only if the Security Level is not “None”.
F1: Information; It provides the model name and F/W version information, which
is helpful for users to understand the updated version.
F4: OSD Position; you can enter the OSD position to make adjustments; we
recommend you to unify the resolution for all computer display mode, and use
this function again to adjust the OSD position. You can use the Up, Down, Left
or Right keys on the keyboard or a mouse to move the OSD position.
F8: Restore Default Setting; Restore the factory default settings. Please note that
all name lists will be cleared and the system settings are set to the default
settings as shown in the table above.
Esc: Exit; Exit the system setting and close the OSD. If you have made changes in
this option, the system will ask whether or not you want to save the setting
before the selected option is effective.
Auto Scan Mode: You can start the OSD first and press “F4” to enter the Auto
Scan Mode. If you want to scan the PC, you must use the
Smart View Setting to select the Auto Scan Time in the System
Setting for the residing time, which includes 5 sec, 10 sec, 20
sec, 30 sec and 60 sec. You can adjust the Channel Display
Mode and Channel Display Time from the Channel Display
mode. By then, all keys on the panel, keyboard and mouse are
not operable. You can only use the ESC key to exit the Auto
Scan Mode.