PLANET KVM-1610 - Manual (Page 12)

12
Cascade Max. 8 KVM
KVM-810 rear panel
KVM-810 rear panel
Max. 64 PCs
Main Console
Step 6: Connecting VGA/Mouse/Keyboard port of PC(s) to the KVM Switch
Install the Master KVM to the 3-in-1 cable (same as the cable for connecting the
KVM to the PC) in the middle of the Slave KVMs.
The rear side of PC
Step 7: Check Again
Double-check all of the connections. You can check the color of keyboard and
mouse connector to make sure the keyboard and mouse cables go to the correct
ports.
Step 8: Connecting Other PCs
Repeat step 5 - 6 for the remainder of the computers.
Step 9: Connecting KVM Power
Attach the power supply to the KVM unit and plug the other end into an electrical
receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep.
Switch on your monitor.