PLANET KVM-1610 - Manual (Page 14)

14
Note
If you have modified the Hot Key for starting the OSD and are
unable to enter the OSD by pressing NumLock, and then you can
start the OSD by using Port Selection Switch first, and then press
F9 to enter into the System Setting to modify the options of the
OSD Entry Hot Key.
If you have modified the Hot Key for starting the OSD and are unable to enter the
OSD by pressing NumLock, then you can start the OSD by using the Port Selection
Switch first, and then press F9 to enter into the System Setting to modify the
options of the OSD Entry Hot Key.
Operation
You can operate the options by keyboard or mouse. For the keyboard operation,
besides the common Up and Down keys, there are special function keys such as
Enter, Space Bar, Function Key (F1, F4…) under the OSD remark field. For the
mouse operation, the left key refers to Enter and the right key refers to Exit. For
example, move the mouse point to your desired PC, and click the left key. The
selection bar will move to that position and then click the left key again for the
execution.
Note
You must use the keyboard to complete the two functions: Name
Edit and Password.
Switch Menu
Master List
1 03-04:Mail Ser 4
Press
Enter
2
LIST: MASTER
PWR C#
KVM NAME SVS
3
● 01 Admin

● 02

● 03 04 Mail Group 
04

● 05 Peter

● 06 08 Web Group 
● 07 16 Data Group 
08

4
: Move Space: Edit Esc: Exit
F1: Smart View Enter: Switching
F4: Auto Scan F9: System Setting
F5: Clear Name List