PLANET DKVM-1708 - Manual (Page 24)

User’s Manual of DKVM-1708/1716
20
A Mod press “F4” to enter the Auto
Scan Mode. If y u must us mart V etting
Auto esiding time, which
includes 5 sec, 1 0 sec. You can adjust the Channel
n e Cha isplay . By
then, all keys on the panel, keyboard and mouse are not operable. You can
only use the ESC key to exit the Auto Scan Mode.
: “None” to “Low” in the System
nte (“A~Z”,“0~9”, a maximum of 12 characters),
and the security will be effective after you confirm the Password. The use of the
Console Lock Time is to set the time to enter a security mode after th
tim you
the security mode, you need to enter the correct password before yo
move the mouse or enter any key from the keyboard. You need a correct
e e whole system normally.
e y Pas ?
After you enter a wrong password for 5 consecutive times, a time de
pear, and a set of “Magic Numbers” will show up at the bottom. Record the
uto Scan
to select the
e : You can start the OSD first and
ou want to scan the PC, yo
Scan Time in the System Setting for the r
e the S iew S
0 sec, 20 sec, 30 sec and 6
d Channel Display Time from th Display Mode a nnel D mode
Security Mode
Setting, and e
Switch the Security Level from
r your Password
e
keyboard and mouse has idled for a predetermined e. Once enter into
u can
password to op rate th
Important Not : What should I do if I forgot m sword
lay bar will
ap
magic numbers and contact with your distributor.
Console - Reconfirmed:
Simultaneously press the largest two numbered Port
election Switches on the panel to start the Console- Reconfirmed. If you
d
isplay Identification Data (EDID) and allows data access by Display Data
lease use the Console Reconfirmed
nction to read the EDID again.
S
change the Console equipment, please use this function to let KVM reconfirm
the equipment at the Console end once.
EDID & DDC:
A vast majority of computer monitors supports the Extende
D
Channel (DDC). The KVM also supports these two specifications, but the KVM
only reads the EDID of the Monitor when the KVM is on. If it is necessary to
change monitors during an operation, p
fu