PLANET DKVM-1708 - Manual (Page 18)

User’s Manual of DKVM-1708/1716
14
tart
k twice or the Port Selection Switches 1 and 2 on the panel
enter the OSD.
to
then you can start the OSD by
using Port Selection Switch first, and then press F9 to enter into
ey.
enter
NumLock, then you can start the OSD by using the Port
odify the options of the OSD Entry Hot Key.
peration
n
use point to your desired PC, and
click the left key. The selection bar will move to that position and then click the
lef
must use the keyboard to complete the two functions: Name
Edit and Password.
S
Press the NumLoc
to
If you have modified the Hot Key for starting the OSD and are unable
enter the OSD by pressing NumLock,
the System Setting to modify the options of the OSD Entry Hot K
If you have modified the Hot Key for starting the OSD and are unable to
the OSD by pressing
Selection Switch first, and then press F9 to enter into the System Setting to
m
O
You can operate the options by keyboard or mouse. For the keyboard
operation, besides the common Up and Down keys, there are special functio
keys such as Enter, Space Bar, Function Key (F1, F4…) under the OSD
remark field. For the mouse operation, the left key refers to Enter and the right
key refers to Exit. For example, move the mo
t key again for the execution.
You