PLANET DKVM-1708 - Manual (Page 21)

User’s Manual of DKVM-1708/1716
17
r points at
#05 and you press Enter, then the system will switch to that particular PC or
、 Instruction Hint Field:
to
the board to move the selection bar, and the situated position indicates the
selected target for giving instructions. For example, if the selection ba
C
press the “Space BAR” to start editing the name. Press F4 to enable/disable
the SVS option.
4
) *↑↓:
(Move)
Use the ↑↓ keys on the keyboard or the mouse
move the selection bar
SPACE:
(Edit)
The “Space BAR” on the keyboard is used to start
editing the name of the PC or KVM.
ESC: Use the “Esc” key on the keyboard to exit the
(Exit) current option or exit OSD.
F4:
(Auto Scan)
Use the F4 key to run Auto Scan, and you can set
the residing time, channel display time and mode
of the Auto Scan from System Setting.
F9:
(System Setting)
Use the F9 key to enter into the System Setting
Menu.
F5: Use the F5 key to clear the v
(Clear Name List)
alues of all Name
fields. If you clear the name list under the Master
under all slaves. If you clear the name list under a
certain slave, then you only clear the name list
screen, then you will also clear the name lists
under that particular Slave KVM.
F1:
(Smart View)
It switches the Smart View Setting.