PLANET DKVM-1708 - Manual (Page 20)

User’s Manual of DKVM-1708/1716
16
PC connects to the Master, then the number consists of the first two digits. If a
ven a name for the PC, the name field will be blank.
2、This field shows the list of the Master KVM or a certain set of Slave KVM
currently displayed on the OSD. We recommend you to give a name to the
Slav
3、Th
he fields are
descri and indicates
normal p cted to the CPU
port.
C#: y 01~08 and the
DKV nnot display al a
time
KVM , it shows that a
set of KVM connects to this port. The number 04 indicates Port 4 and 08
indicates Port 8 and 16 indicates Port 16 and so on.
VM is not on, there will have no number in this field.
NAME e Slave
KVM o from the
group “．”, “：”.
Please use the CapsLock to toggle the upper and lower cases.
SVS: . The
SVS is allel. If this option
is set Hot Key Switch
or Mo he option by Auto Scan. You also can use
ouse to click this field.
a
User has not gi
e KVM, or else the display after LIST: will be blank.
is field shows the list of connections to the KVM, and t
bed below : PWR: It shows the status of power supply a
ower supply for the equipment (PC or KVM) conne
It shows the channel number; the DKVM-1708 will displa
M-1716 will display 01~08; 09~16 (Since the screen ca l at
, therefore you can use PgUp/PgDn to switch the pages).
: It shows the KVM model. If there is a number in this field
If the connected K
: It shows the name of the equipment, and users can name th
r C on their own. There are a total of 12 characters selec d P te
of “A~Z”, “a~z”, “0~9” , “＋”, “－” , “＊”, “／” , “＝”, “［”,“］”, “，”,
It shows the Smart View Setting; use ♁ to open and Θ to close
blank and not clickable if the KVM is connected in par
ke the switch by operating the to open, then you can ma
use Clicking or selecting t
m
Selection BAR: It shows the selection bar (Green); you can use the ↑↓ keys on