4 connecting the console – PLANET DKVM-1708 User Manual
Page 14
User’s Manual of DKVM-1708/1716
10
nsole
o connect an LCD console
computer, perform the following steps
2.4 Connecting the Co
T
to a
8 Port of KVM
16 Port of KVM
1. Turn off your computer. You should always turn off your computer before
onnecting a device.
2.
el of your computer.
3.
e
ect the PS/2 mous
correct PS/2 ports on the rear panel of your computer. Or you can use USB
int ac
ter. (Us
your interface.
The switch has to be on PS/2 side when you use PS/2 interface connector.)
ease don't plug PS/2 and USB cables at the same time
connecting or disc
Connect the video (VGA) connector of the KVM cable to the video card
connector on the rear pan
Id ntify and conn
e and PS/2 keyboard connector to the
erf e to connect your compu
e PS/2-USB switch to select
Pl