PLANET DKVM-1708 - Manual (Page 17)

User’s Manual of DKVM-1708/1716
13
3.2 KVM OSD Function
3.2.1 Manual Key
It is the simple swi to press the Port Selection
Switch on the front panel of the KVM. The Selection LED (Red) is on, indicating
that you are switching to the corresponding port.
The Port Selection Switch functions only when connected to a PC.
u
t t Selection
it
r Aut ction Switches functions
3.2 nd Mouse Clicking
ot key and mouse clicking are applicable for switching a small section. You
an select the SVS (Smart View Setting) from the OSD of the PC first (for a
uick switch of PC) and use the keyboard (press the Ctrl key twice) or the
ouse (press and hold the middle button while pressing the left or right button)
switch to the previous or next set of PC.
The mouse must have at least 3 keys. As far as you select a PC with
SVS, you can use this method for the switch.
3.2.3 OSD (On Screen Display)
Press the NumLock on the keyboard twice or simultaneously press the Push
Buttons 1 and 2 of the Port Selection Switch on the KVM panel to start the OSD.
Use the key Up, Down and Enter keys on the keyboard to switch or directly
move the mouse to the target PC, and then double click the left button.
Additionally, you also can use the numeric keys to enter the direct switch. For
example, if you want to switch a PC to the Slave KVM port 04 under the Master
KVM port 03, then you can start the OSD and then directly enter 0304. If you
are using a standalone machine, then just enter the first two digits.
More OSD related information is given in the following OSD sections.
st tching method. You just need
1.
2. If the O
can no
ch.
ffline Skip of the OSD System Setting is Auto, then yo
make any switch when pressing an offline Por
sw
3. Fo o Scan Mode, none of the Port Sele
.2 Hot Key a
H
c
q
m
to
the