PLANET WSG-500 - Manual (Page 134)

130
If the amount of traffics is larger than 4 GB, the attributes of “XXXX-4GB” will be used. For
example, if the amount is 5 GB, the following settings should be set: “WSG-500-Byte-Amount =
1048576” and “WSG-500-Byte-Amount-4GB = 1”.
On the other hand, when the administrator fills in all attributes, the user will be kicked out from
system if any condition is reached. For example, if the administrator sets
“WSG-500-Byte-Amount = 1048576”; “WSG-500 - MaxByteIn = 1048576” and “WSG-500-
MaxByteOut = 1048576”, the user will be kicked out from system when the downlink, uplink, or
total traffic exceeds the limit.
2. VSA configuration in RADIUS server (IAS Server)
This section will guide you through a VSA configuration in your external RADIUS server. Before
getting started, please access your external RADIUS server’s desktop directly or remotely from
other PC.
Step 1
Confirm the following key elements in RADIUS server: users, groups, and policies.
♦
Verify whether there are already users in RADIUS Server.
♦ Verify whether there are already Groups and assigned users belonging to these Groups
in RADIUS Server.
♦ Verify whether there are already Policies and assigned Groups belonging to these
Policies in RADIUS Server.
Step 2
Run “Internet Authentication Server” and open “Remote Access Policies”
Select a Policy with right click and scroll down to its Properties page