PLANET WSG-500 - Manual (Page 108)

User’s Manual
WSG-500 Wireless Hotspot Gateway ENGLISH
104
11.2.1 E-Mail
Configure Notification, go to: Status >> E-mail & SYSLOG.
y Notification E-mail Settings:
¾ Receiver Email Address (es): Up to 3 e-mail address can be set up to receive the notification.
These are the receiver’s e-mail addresses. There are four kinds of notification to selection --
Monitor IP Report, Users Log, On-demand Users Log and Session Log, and check which type of
notification to be sent.
¾ Interval: The time interval to send the e-mail report.
¾ SMTP Setting Test: To test the settings immediately.
¾ Sender Email Address: The e-mail address of the administrator in charge of the monitoring.
This will show up as the sender’s e-mail.
¾ SMTP Server: The IP address of the sender’s SMTP server.
¾ SMTP Auth Method: The system provides four authentication methods, Plain, Login,
CRAM-MD5 and NTLMv1, or “None” to use none of the above. Depending on which
authentication method selected, enter the Account Name, Password and Domain.
o NTLMv1 is not currently available for general use.
o Plain and CRAM-MD5 are standardized authentication mechanisms while Login and
NTLMv1 are Microsoft proprietary mechanisms. Only Plain and Login can use the
UNIX login password. Netscape uses Plain. Outlook and Outlook express use Login as
default, although they can be set to use NTLMv1.
o Pegasus uses CRAM-MD5 or Login but which method to be used can not be
configured.