PLANET WSG-500 - Manual (Page 123)

119
y TCP/IP Network Setup
If the operating system of the PC in use is Windows 95/98/ME/2000/XP, keep the default settings
without any changes to directly start/restart the system. With the factory default settings, during
the process of starting the system, WSG-500 with DHCP function will automatically assign an
appropriate IP address and related information for each PC. If the Windows operating system is
not a server version, the default settings of the TCP/IP will regard the PC as a DHCP client, and this
function is called “Obtain an IP address automatically”.
If checking the TCP/IP setup or using the static IP in the LAN1/LAN2 or LAN3/LAN4 section is
desired, please follow these steps:
ƒ Check the TCP/IP Setup of Window 9x/ME
1) Choose Start >> Control Panel >>
Network.
2) Click on the Configuration tab and select
“TCP/IP >> AMD PCNET Family
Ethernet Adapter (PCI-ISA)”, and then
click Properties. Now, you can choose to
use DHCP or a specific IP address.