PLANET SG-500 - Manual (Page 44)

SG-500 VPN Security Gateway User’s Manual
- 39 -
3.1 Interface
Define the required fields of Interface
LAN:
„ Using the LAN Interface, the Administrator can set up the LAN network of SG-500.
Ping:
„ Select this function to allow the LAN users to ping the Interface IP Address.
HTTP:
„ Select to enable the user to enter the Web UI of SG-500 from Interface IP.
WAN:
„ The System Administrator can set up the WAN network of SG-500.
Connect Mode:
„ Display the current connection mode:
‹ PPPoE (ADSL user)
‹ Dynamic IP Address (Cable Modem User)
‹ Static IP Address
‹ PPTP (European User Only)
Upstream/Downstream Bandwidth:
„ The System Administrator can set up the correct Bandwidth of WAN network Interface here.
Auto Disconnect:
„ The PPPoE connection will automatically disconnect after a length of idle time (no activities).
Enter the amount of idle time before disconnection in the field. Enter “0” if you do not want
the PPPoE connection to disconnect at all.