PLANET SG-500 - Manual (Page 18)

SG-500 VPN Security Gateway User’s Manual
- 13 -
Dynamic Routing (RIPv2)
„ By enable LAN, WAN, or DMZ Port to send and receive RIPv2 packets, the SG-500 appliance
can communicate with internal or external routers and dynamically update the route table (The
MIS engineers can set up routing information update timer and routing information timeout
when it stop to receive the RIPv2 packets and the router will automatically cancel the dynamic
routing table).
SIP protocol pass-through:
„ When user use VoIP or Video Conference has abnormally situation, can use this function to
resolve this problem.
Administration Packet Logging:
„ After enable this function; the SG-500 will record packet which source IP or destination
address is SG-500. And record in Traffic Log for System Manager to inquire about.
Define the required fields of Time Settings
Synchronize Time/Date:
„ Synchronizing the SG-500 with the System Clock. The administrator can configure the
SG-500’s date and time by either syncing to an Internet Network Time Server (NTP) or by
syncing to your computer’s clock.
GMT:
„ International Standard Time (Greenwich Mean Time)
Daylight saving time setting:
„ When user live in the time zone implement daylight saving time, during this time unit will
adjust system time as the local time.