PLANET SG-500 - Manual (Page 294)

SG-500 VPN Security Gateway User’s Manual
- 289 -
8.7 Outbound
STEP 1﹒Enter Outbound in Accounting Report and select Top Users to inquire the statistics of
Send / Receive packets, Downstream / Upstream, First packet/Last packet/Duration
and the service from the LAN or DMZ user’s IP that pass the SG-500.
„ TOP: Select the data you want to view; it presents 10 results in one page.
Pull-down menu selection
„ Source IP： The IP address used by LAN users who use SG-500 to connect to
WAN service server.
„ Downstream：The percentage of downstream and the value of each WAN service
server which uses SG-500 to LAN user.
„ Upstream：The percentage of upstream and the value of each LAN user who uses
SG-500 to WAN service server.
„ First Packet：When the first packet is sent to WAN service server from LAN user,
the sent time will be recorded by the SG-500.
„ Last Packet：When the last packet sent from WAN service server is received by the
LAN user, the sent time will be recorded by the SG-500.
„ Duration：The period of time which starts from the first packet to the last packet to
be recorded.
„ Total Traffic：The SG-500 will record the sum of packet sent/receive time and
show the percentage of each LAN user’s upstream/downstream to WAN service
server.
„ Reset Counter：Click Reset Counter button to refresh Accounting Report.