PLANET SG-1000 - Manual (Page 89)

Define the required fields of Authentication
Authentication Management
„ Provide the Administrator the port number and valid time to setup SG-1000
authentication. (Have to setup the Authentication first)
‹ Authentication Port: The internal user have to pass the authentication to
access to the Internet when enable SG-1000.
‹ Re-Login if Idle: When the internal user access to Internet, can setup the idle
time after passing authentication. If idle time exceeds the time you setup, the
authentication will be invalid. The default value is 30 minutes.
‹ URL to redirect when authentication succeed: The user who had passes
Authentication have to connect to the specific website. (It will connect to the
website directly which the user want to login) The default value is blank.
‹ Messages to display when user login: It will display the login message in the
authentication Web UI. (Support HTML) The default value is blank (display
no message in authentication Web UI)
z Add the following setting in this function:
Authentication Setting Web UI