PLANET SG-1000 - Manual (Page 258)

19.1 Interface
STEP 1 Enter Interface in Status function; it will list the setting for each Interface:
„ PPPoE Con. Time: The last time of the SG-1000 to be enabled
„ MAC Address: The MAC Address of the Interface
„ IP Address/ Netmask: The IP Address and its Netmask of the Interface
„ Rx Pkts, Err. Pkts: To display the received packets and error packets
of the Interface
„ Tx Pkts, Err. Pkts: To display the sending packets and error packets of
the Interface
„ Ping, Web UI: To display whether the users can Ping to the SG-1000
from the Interface or not; or enter its Web UI
„ Forwarding Mode: The connection mode of the Interface
„ Connection Status: To display the connection status of WAN
„ DnS/ UpS Kbps: To display the Maximum DownStream/UpStream
Bandwidth of that WAN (set from Interface)
„ DnStream Alloca.: The distribution percentage of DownStream
according to WAN traffic
„ UpStream Alloca.: The distribution percentage of UpStream according
to WAN traffic
„ Default Gateway: To display the Gateway of WAN
„ DNS1: The DNS1 Server Address provided by ISP
„ DNS2: The DNS2 Server Address provided by ISP