PLANET SG-1000 - Manual (Page 15)

2.2 Add Permitted IPs
STEP 1 Add the following setting in Permitted IPs of Administration:
„ Name: Enter master
„ IP Address: Enter 163.173.56.11
„ Netmask: Enter 255.255.255.255
„ Service: Select Ping, HTTP, and HTTPS.
„ Click OK
„ Complete add new permitted IPs
Setting Permitted IPs Web UI
Complete Add New Permitted Ips
To make Permitted IPs be effective, it must cancel the Ping, HTTP, and HTTPS
selection in the Web UI of SG-1000 that Administrator enter. (LAN, WAN, or DMZ Interface)
Before canceling the HTTP and HTTPS selection of Interface, must set up the Permitted IPs
first, otherwise, it would cause the situation of cannot enter Web UI by appointed Interface.