PLANET SG-1000 - Manual (Page 45)

Define the required fields of Interface
LAN:
„ Using the LAN Interface, the Administrator can set up the LAN network of SG-
1000.
Ping:
„ Select this function to allow the user to ping the Interface IP Address.
HTTP:
„ Select to enable the user to enter the Web UI of SG-1000 from Interface IP through
HTTP protocol.
HTTPS:
„ Select to enable the user to enter the Web UI of SG-1000 from Interface IP through
HTTPS protocol.
WAN:
„ The System Administrator can set up the WAN network of SG-1000.
Balance Mode:
„ Auto: The SG-1000 will adjust the WAN 1/2 utility rate automatically according
to the downstream/upstream of WAN. (For users who are using various download
bandwidth)
„ Round-Robin: The SG-1000 distributes the WAN 1/2 download bandwidth 1:1, in
other words, it selects the agent by order. (For users who are using same download
bandwidths)
„ By Traffic: The SG-1000 distributes the WAN 1/2 download bandwidth by
accumulative traffic.
„ By Session: The SG-1000 distributes the WAN 1/2 download bandwidth by
saturated connections.
„ By Packet: The SG-1000 distributes the WAN 1/2 download bandwidth by
accumulated packets and saturated connection.