PLANET GRT-501 - Manual (Page 36)

GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- - 35
Step 1.
Click SNMP to configure the parameters.
In the table of current community pool,
you can setup the access authority.
In the table of current trap host pool,
you can setup the trap host.
Press Modify to modify the community
pool.
Step 2.
SNMP status: Enable
Step 3.
Access Right:
Deny for deny all access
Read for access read only
Write for access read and write.
Community: it serves as password for
access right.
After configuring the community pool,
press OK.