3 setting up the hardware environment, Etting up the hardware environment – PLANET GRT-501 User Manual

Page 11

GRT-501 G.SHDSL.bis Bridge Router User’s Manual

- -

2.3 Setting up the hardware environment

Step 1. Connect the power adapter to the port labeled DC-IN on the rear panel.

Step 2. Connect the Ethernet cable between the LAN port and PC.

Step 3. Connect male end of RS-232 cable to the console port and female end to any free

COM port in PC.

Step 4. Connect the phone cable to the Line port, and the other side of phone cable

connects to wall jack.

Step 5. Connect the power adapter to power source.

Step 6. Turn on the PC or NB, which is used for configuration the Router.