PLANET GRT-501 User Manual
Page 17
GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- -
16
Step 3.
Assign the IP pool for your DHCP
server. Click Next.
For example:
If the LAN IP address is 192.168.0.1,
the IP range of LAN is 192.168.0.2 to
192.168.0.51. The DHCP server
assigns the IP form Start IP Address to
End IP Address. The legal IP address
range is form 0 to 255, but 0 are
reserved as network name and 255 are
reserved for broadcast. It implies the
legal IP address range is from 1 to 254.
That means you cannot assign an IP
greater than 254 or less then 1.
Lease time 72 hours indicates that the
DHCP server will reassign IP
information in every 72 hours.
Step 4.
Enter the Parameters in BASIC –
STEP4
VPI: 0
VCI: 32
AAL5 Encapsulation: LLC
Protocol: PPPoA + NAT or PPPoE +
NAT
Click Next to setup the ISP setting.
Step 5.
1. Enter user name provided by ISP:
test
2. Enter Password provided by ISP:
test
3. Re-enter Password for confirmation:
test
The user name and password
provided by your ISP.
4. Idle Time: 10
If you want your Internet connection
to remain on at all time, enter 0 in the
Idle Time field.
5. IP Type: Dynamic
6. Click Next.
Step 6.
The screen will prompt the new configured parameters. Check the parameters and click Restart. The router
will reboot with the new setting or press Continue to configure another parameters.