PLANET DVR-1672 - Manual (Page 54)

48
5.10 Utility Setup
Item Description
HDD Initialization Select to enter hard disk initialization menu. Please
stop recording before entering this menu. Enter
the menu, system will show all the data (model/
volume) of HDD that is installed in the DVR. Check the
HDD you’d like to initialize, and then press “Start”.
HDD initialization is successful when the status shows
“Succeed”.
USB Initialization Clean up all data on USB. Enter USB initialization and
press “YES” to clean up all data on your USB. The
initialization is done when it shows “Succeed”.
System Recovery Restore system default values.
Reset System
Events Reset all the recording events in the DVR.
Copy Setup to USB Copy configuration to a USB device. There will be a
file named “sdvr.config” on your USB.
Download Setup
from USB Download configuration from a USB device into DVR.
Upgrade Upgrade DVR through USB.
Please stop recording and backup setup configuration
before upgrading.
System will reboot automatically when the
upgrade is completed.