PLANET DVR-1672 - Manual (Page 30)

24
5.2 Record Setup
Item Description
HDD FULL
Select STOP to stop recording or OVERWRITE to reuse
the HDD when HDD is full.
[Stop]：Stop Recording
[Overwrite]：Start to overwrite beginning from the
oldest data of HDD, and continue to record.
Schedule - Record
Normal Enable/ Disable normal recording
Schedule – Record
Motion Enable/ Disable recording while Motion is detected
Schedule – Record
Sensor Enable/ Disable recording while Sensor is triggered
Pre-Alarm Record
Enable/ Disable pre-event recording while motion or
sensor is triggered but not in the recording mode.
This option decides if save the pre-recording time 10
seconds data or not.
Audio Record Enable/ Disable Audio recording.
Video Preservation
Information stored within the HDD is preserved for
only a specified length of time.
Quality & Frame
Rate Setup… Setup the quality and frame rate for each channel
under normal recording and event recording type.