4 backup settings, Backup settings, Igure – PLANET WNAP-C3220 User Manual
Page 55: Erver
User Manual of WNAP-C3220
-47-
Click “Add” to setup a Log Server.
Figure 5-33 Add Log Server
The page includes the following fields:
Object
Description
Number of Logs:
Set the number of logs. Default is 200.
Log Server IP:
Enter the log server IP.
Log Server Port:
Enter the log server port.
5.7.4 Backup Settings
This section allows you to backup the current settings or to restore the previous settings configured on the
device.
Choose menu “Tools Backup Settings” to back up or restore the configuration of the WNAP-C3220.
Once you have configured the Wireless AP the way you want it, you can save these settings to a configuration
file on your local hard drive that can later be imported to your wireless AP in case the device is restored to
factory default settings.
Backup & Restore