2 dhcp client list, Dhcp client list, Igure – PLANET WNAP-C3220 User Manual
Page 42: Dhcp, Erver
User Manual of WNAP-C3220
-34-
Figure 5-18 DHCP Server
The page includes the following fields:
Object
Description
DHCP Server:
Click “Enable” to enable the DHCP function.
Start IP:
The start IP address of all the available successive IPs.
End IP:
The end IP address of all the available successive IPs.
Lease Time:
Select the time for using one assigned IP from the dropdown list. After the
lease time, the AP automatically assigns new IP
Subnet Mask:
AP’s LAN subnet mask.
Gateway:
Suggest to input the IP address of the LAN port of the router; default value is
192.168.1.253
Primary DNS
Server:
Enter the necessary DNS address.
Secondary DNS
Server:
Enter the other DNS address which is optional.
5.4.2 DHCP Client List
This section displays the information of DHCP clients.