2 starting setup in the web ui, Starting setup in the web ui, Igure – PLANET WNAP-C3220 User Manual
Page 26: Ogin by default, Address, Ogin, Indow
User Manual of WNAP-C3220
-18-
4.2 Starting Setup in the Web UI
It is easy to configure and manage the AP with the web browser.
Step 1. To access the configuration utility, open a web browser and enter the default IP address
web address field of the browser.
Figure 4-5 Login by default IP address
After a moment, a login window will appear. Enter admin for the User Name and Password, both in lower case
letters. Then click the OK button or press the Enter key.
Figure 4-6 Login Window
Default IP Address: 192.168.1.253
Default User Name: admin
Default Password: admin
If the above screen does not pop up, it may mean that your web-browser has been set to a
proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, on the screen that
appears, cancel the Using Proxy checkbox, and click OK to finish it.