4 dhcp server, 1 dhcp server, Dhcp server – PLANET WNAP-C3220 User Manual
Page 41

User Manual of WNAP-C3220
-33-
Static IP
Specify a static IP address, subnet mask, default gateway and DNS
server for WNAP-C3220 manually. Make sure the specified IP
address is unique on your network in order to prevent IP conflict.
Address
Mode:
Dynamic
If a DHCP server exists in your network, you can select this option,
and thus the WNAP-C3220 is able to obtain IP settings
automatically from that DHCP server.
IP Address:
Enter the IP address of your AP or reset it in dotted-decimal notation (factory
default: 192.168.1.253).
Subnet Mask:
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Gateway:
(Optional.) Suggest to input the IP address of the LAN port of the Router, default
value is 192.168.1.1
Primary DNS
Server:
Enter the necessary DNS address provided by your ISP.
Secondary
DNS Server:
Enter the other DNS address if your ISP provides you with 2 such addresses, and
it is optional.
1.
If you change the IP address of LAN, you must use the new IP address to
login the AP.
2.
When the IP address of the WNAP-C3220 is changed, the clients on the
network often need to wait for a while or even reboot before they can access
the new IP address. For an immediate access to the AP, please flush the
netbios cache on the client computer by running the “nbtstat –r” command
before using the device name of the WNAP-C3220 to access its Web
Management page.
5.4 DHCP Server
The menu contains submenus of the settings about DHCP. Please refer to the following sections for the details.
5.4.1 DHCP Server
Choose menu “DHCP Server” to configure the settings for DHCP server on this page. After the configuration is
done, please click the “Save” button to save the settings.