PLANET WL-U356A - Manual (Page 25)

21
Click “Change” to configure the Access Point mode settings.
Parameters
Description
Channel Select the channel you want to use.
Basic Rate Select the applicable transfer rate.
SSID Enter the desired SSID for the access point.
Hide SSID Check to disable ESSID broadcast function.
Apply
After click “Change” button, the name of this button will become
“Apply”. Please click “Apply” to submit the changes.
WEP
You may select “Enable” and refer to section 4.2 to configure
the settings after click “Setting” button.
Authentication
Mode
Open System: With the same WEP key between the stations,
the stations don’t need to be authenticated, and
this algorithm was set to default.
Shared Key: With the same WEP key between the stations in
this Authentication algorithm, this type will use
packets with encryption by transferring a
challenge text which will be acknowledge by both
side of the stations. In order to choose which
authentication algorithm will be used, you must