Igure, Ecurity – PLANET WDAP-C7200AC User Manual
Page 95

User Manual of WDAP-C7200AC
-86-
Figure 5-71 WDS – Set Security
The page includes the following fields:
Object
Description
Enable WDS
Check the box to enable the WDS function. Please select WDS or
AP+WDS in the Mode of Wireless Basic Settings before you enable
WDS on this page.
MAC Address
You can enter the MAC address of the AP you want to connect with.
Data Rate
Default is “Auto”.
Comment
You can make some comment for each MAC address on the list.
Set Security
Click the “Set Security” button to configure the wireless security
parameters of the AP you want to connect via WDS.
Show Statics
Click the “Show Statics” button to show the WDS AP.
Current WDS AP List
You can select some MAC addresses of the AP and click the “Delete
Selected” button to delete it.
WDS feature can only be implemented between 2 wireless devices that both support the
WDS feature. Plus, channel, security settings and security key must be the same on
both such devices.
To encrypt your wireless network, click “Set Security”. For the detail of wireless security,
see
. Do remember to reboot the device after you save your wireless
security settings; otherwise, the WDS feature may not function.