PLANET WDAP-C7200AC - Manual (Page 32)

User Manual of WDAP-C7200AC
-23-
Object Description
Band Supports 802.11a, 802.11n, 802.11ac and mixed. Please choose its band
according to your clients.
Mode Supports AP, Client, WDS and AP+WDS mode.
SSID Service Set Identifier identifies your wireless network.
Channel Width Select 80MHz if you use 802.11ac; select 40MHz if you use 802.11n;
otherwise, 20MHz for the 802.11a mode.
Control Sideband It is only valid when you choose channel width 40MHz.
Channel Number Indicates the channel setting for the AP.
Step 4: Wireless 5GHz Security Settings
Secure your wireless network by turning on the WPA or WEP security feature on the router. For this section you
can set WEP and WPA-PSK security mode.
Figure 5-8 Wizard – Wireless 5GHz Security Setup
 Encryption: WEP
The following picture shows how to set the WEP security.
Figure 5-9 5GHz Wireless Security Setup – WEP Setting
The page includes the following fields:
Object Description
Key length WEP supports 64-bit or 128-bit security key.
Key Format User can enter key in ASCII or Hex format.
Key Setting Enter the key whose format is limited by the Key format, ASCII or Hex.