PLANET WDAP-C7200AC - Manual (Page 18)

User Manual of WDAP-C7200AC
-9-
Supports WPS (Wi-Fi Protected Setup)
Enable/ Disable SSID Broadcast
WMM (Wi-Fi Multimedia): 802.11e Wireless QoS
Multiple SSID: up to 5 at 2.4GHz and 5GHz, respectively
Wireless Isolation: Enables to isolate each connected wireless client from
communicating with each other
IAPP (Inter Access Point Protocol): 802.11f Wireless Roaming
Wireless Advanced
Provides Wireless Statistics
Max. Clients
Wire: 253
2.4GHz Wireless: 32
5GHz Wireless: 32
Built-in DHCP server supporting static IP address distributing
Supports UPnP
Supports 802.1d Spanning Tree
LAN
Supports 802.1Q VLAN
Web-based (HTTP) management interface
SNTP time synchronize
Easy firmware upgrade
Supports Scheduling Reboot
System Management
Supports Smart Discovery Utility
Standards Conformance
IEEE Standards
IEEE 802.11ac (Draft 2.0, 2T2R, up to 867Mbps)
IEEE 802.11n (2T2R, up to 300Mbps)
IEEE 802.11g
IEEE 802.11b
IEEE 802.11i
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control
Other Protocols and
Standards
CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP
Environment & Certification
Temperature
Operating: 0 ~ 50 degrees C
Storage: -40 ~ 70 degrees C
Humidity
Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 90% (non-condensing)
Regulatory FCC Part 15B & 15C, IC, RoHS