2 tcp / ip settings, 1 lan settings, Tcp / ip settings – PLANET WDAP-C7200AC User Manual

Page 36: Lan settings, Igure, Etting

Text mode
Original mode

User Manual of WDAP-C7200AC

-27-

5.2 TCP / IP Settings

This page is used to configure the parameters for local area network which connects to the LAN port of your AP.
Here you may change the setting for IP address, subnet mask, DHCP, etc.

5.2.1 LAN Settings

On the LAN Settings page, you can configure the IP parameters of the LAN on the screen as shown below.

Figure 5-16 LAN Setting

The page includes the following fields:

Object

Description

IP Address

The default LAN IP address of the WDAP-C7200AC is 192.168.1.253.
You can change it according to your request.