PLANET ICA-W8500 - Manual (Page 35)

5 Mega-pixel PoE / Wireless Fish-Eye IP Camera
ICA-8500/ICA-W8500
3.4.2 Time Tab
The Time tabbed pane is where you set up the clock of your Camera to synchronize with your
local time. Where:
System Time
The Network camera current date and time is applied and displayed
here based on the setup status of the System Time Settings as
detailed below.
Time Zone
Select the applicable Time Zone of your city in reference to
Greenwich Mean Time.
Automatic
Select this item if you want to automatically synchronize the camera
clock with that of Network Time Protocol (NTP) Server.
Keep Current Date and
Time Select this option in lieu of automatic synchronization if the camera is
not connected to NTP Server and uses its own embedded clock.
Set Manually
Synchronize with the PC Time: Select this option to manually
synchronize the Network Camera clock (date and time) with that of
the local host computer.
Assign value: Select this option to enter the date and time
manually.
Enable Daylight
Saving
Select this option only when applicable at your location. Two setup
settings; the Start time and End time are needed to implement the
feature.
35