PLANET ICA-W8500 - Manual (Page 13)

5 Mega-pixel PoE / Wireless Fish-Eye IP Camera
ICA-8500/ICA-W8500
¾
Bottom Panel
Interface Description
Power Jack The input power is 12V DC.
RJ-45 LAN socket
Connection to PC or Hub/Switch.
It is connected to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built N-way protocol can
detect or negotiate the transmission speed of the network
automatically. Please use CAT-5 cable to connect the Network
Camera to a 100Mbps Fast Ethernet network switch or hub.
Micro SD Card Slot
The IP camera has a built-in micro SD card slot that accepts
micro SD memory card for image / video event recording.
Audio Out
The loud speaker of the IP camera features voice alert and
two-way audio.
Audio In The IP camera that comes with a microphone.
GPIO The 7-pin terminal block includes 4 input ports and 1 output port.
¾ Terminal block for I/O connectors
Pin Function Description
1 GND
2 DI
3 GND
4 DO_COM
Digital Input:
Only one set is designed for this camera model. The internal device
is also a photo-coupled electrical relay, and the external device can
be simply an On/Off switch. Each set of On/Off switch can be
connected as one trigger source.
Digital Output:
Each digital output pin to COM is a photo-coupled relay on Normal
Open status. External device can directly connect to the terminals.
However, the current that will go through the 2 nodes must not
13