PLANET ICA-W8500 - Manual (Page 15)

5 Mega-pixel PoE / Wireless Fish-Eye IP Camera
ICA-8500/ICA-W8500
2.2.2 Network Installation
Step 1. Prepare a PC with Ethernet link to the network
Step 2. Connect an Ethernet cable
Connect LAN port (RJ-45) of the IP camera to a network switch. For ICA-8500,
when this switch is a PoE device, you can ignore the next step.
For ICA-8500, If there has an IEEE 802.3af PoE switch in your network, you can
connect the IP camera’s LAN cable to this PoE switch to obtain power. The power
adapter is unnecessary when the IP camera is powered by PoE switch.
Step 3. Attach the power supply
Plug the power adapter in the IP camera and connect the other end to the power
outlet.
Only use the power adapter supplied with the IP camera; otherwise, the product
may be damaged.
Step 4. Plug Power on 100V ~ 240V
Ensure the power adaptor specification matches the power system (100 ~ 110V AC
or 220 ~ 240V AC) and connect the adaptor to the outlet.
Step 5. Check LED status
The Power LED is defined to identify the IP camera status. When the IP camera is
booting, the LED will flash, and while the IP camera is ready, the LED will be green.
Step 6. Adjust lens focus
Clockwise or counter-clockwise rotation can be adjusted for the focus of the IP
camera lens.
15