PLANET MC-1610MR - Manual (Page 45)

5.2.4 Redundant Backup Setting
This section allows you to enable or disable redundant backup setting function of Managed Media Converter Chassis, the
screen in Figure 5-10 appears. After setup complete, press “Apply” button to save current configuration.
Figure 5-10 Redundant Backup Setting Web Page Screen
The redundant backup setting function already divides 8 redundant groups and each group includes 2 ports, the ports with an
odd number will be “Master”. Vice versa, the ports with even number will be Slave”.
Once enable the redundant backup setting function, only the Master fiber interface will work as a major fiber connection and the
Slave fiber interface as a backup fiber connection. When the system detects Master fiber interface disconnects then the slave
fiber interface will active as major fiber connection to avoid network downtime.
When the system detect the Master fiber interface of get recovery, then the Slave Fiber interface will disconnect automatically
and become a backup fiber connection again.
#
Notice: LLCF must active on both Master and Slave devices. If not, then the redundant backup setting
function will not work.
45