PLANET MC-1610MR - Manual (Page 33)

4.4.3.2 Set redundant [n] disable/enable
This command allows disable or enable per redundant group of Managed Media Converter Chassis, the correct usage is
shown as below:
Set redundant[n]disable/enable: n=1-8, to disable or enable per redundant group of Managed Media Converter Chassis, the
screen in Figure 4-17 appears.
Figure 4-17 Set redundant [n] disable / enable command screen
The redundant backup setting function already divides 8 redundant groups and each group includes 2 ports, the ports with an
odd number will be “Master”. Vice versa, the ports with even number will be Slave”.
Group Master Slave
1 1 2
2 3 4
3 5 6
4 7 8
5 9 10
6 11 12
7 13 14
8 15 16
Once enable the redundant backup setting function, only the Master fiber interface will work as a major fiber connection and the
Slave fiber interface as a backup fiber connection. When the system detects Master fiber interface disconnects then the slave
fiber interface will active as major fiber connection to avoid network downtime.
When the system detect the Master fiber interface of get recovery, then the Slave Fiber interface will disconnect automatically
and become a backup fiber connection again.
#
Notice: LLCF must active on both Master and Slave devices. If not, then the redundant backup setting
function will not work.
33