PLANET IGT-1205AT - Manual (Page 30)

30
6. Cable Connection Parameters
The wiring details are shown below:
100FX Fiber Optic Cables:
Standard Fiber Type Cable Specifications
100BASE-FX (1300nm) Multi-mode 50/125μm or 62.5/125μm
100BASE-FX (1310nm)
Multi-mode 50/125μm or 62.5/125μm
Single-mode 9/125μm
100BASE-BX-U
(TX :1310/RX :1550)
100BASE-BX-D
(TX :1550/RX :1310)
Single-mode 9/125μm
1000X Fiber Optic Cables:
Standard Fiber Type Cable Specifications
1000BASE-SX (850nm) Multi-mode 50/125μm or 62.5/125μm
1000BASE-LX (1300nm)
Multi-mode 50/125μm or 62.5/125μm
Single-mode 9/125μm
Wiring Distances:
Standard Fiber
Diameter
(micron)
Modal
Bandwidth
(MHz * km) Max.
Distance
(meters)
1000BASE- SX MM
62.5
62.5
50
50 100
200
400
500
220
275
500
550
1000BASE- LX
MM
62.5
50
50
5
4
5
550
SM 9 N/A 5000*
Note
The single-mode port (1000BASE-LX port) of IGT-805AT
/ IGT-1205AT complies with LX 5 kilometers and provides
an additional margin allowing for a 10/20/30/40/50/60/
70/120 kilometer Gigabit Ethernet link on single mode
fiber.