PLANET IGT-1205AT - Manual (Page 23)

23
3.5 Cable Connection
 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable. You can
plug in and out the transceiver to/from any SFP port without having to
power down the Industrial Gigabit Media Converter as Figure 3-1 shows
MGB / MFB Series
Transceiver
Figure 3-1: Plug in the SFP Transceiver
Note
It is recommended to use PLANET SFPs on the Indus-
trial Gigabit Media Converter. If you insert an SFP trans-
ceiver that is not supported, the Industrial Gigabit Media
Converter will not recognize it.
 1000BASE-SX/LX:
Before connecting the other switches, workstation or Media Converter,
please do the following:
1. On IGT-1205AT, set the DIP Switch of SFP Port 1 or Port 2 to the
“OFF” position with fiber speed 1000BASE-X.
ON OFF
Port 1 (DIP 1) 100FX 1000X
Port 2 (DIP 2) 100FX 1000X