PLANET ICA-5250V - Manual (Page 44)

You can deny an IP address or a range of IP address so that they cannot access the IP camera. Tick
the "enable" box, key in the IP address you want to deny, select” deny" then click” Add" to add it to the
be denied by the camera because the "deny" condition
as the priority according to our ranking way.
5.2.2.4 QoS/DSCP (Quality of Server/Differentiated Services Code-point)
list.
You can also choose to deny a range of IP address but allow one or several IP address of them. Take
the picture above for example, IP address 192.168.50.151~161 are not allowed to connect to the
camera, but only 192.168.50.159 can access. In the list "allow" condition must be ranked before
"deny" condition. For example, if we exchange the sequence, set "Deny:
192.168.50.151~192.168.50.161" for the first item and "Allow:192.168.50.159" for the second item in
the list, the IP "192.168.50.159" turns out to
h
DSCP specifies a simple mechanism for classifying and managing network traffic and provide QoS
0, 0, 0" or "63, 63, 63" because
bandwidth (1/3).
ely:
IP
Management: HTTPS / HTTP / SNMP
on IP networks. DSCP is a 6-bit in the IP header for packet classification purpose.
The number 0~63 for Live Stream, Event / Alarm, and Management represent the ratio that the
bandwidth is divided. For example, if you set 5, 10, and 20 for the three items, then the bandwidth
of the three items is 5:10:20. There is no difference between setting "
under these two setting the three items will get equal
The three stream control the protocols respectiv
• Live Stream (Video and audio): RTP / RTSP
• Event/Alarm: FTP / SMTP / SAMBA / S
•
1. The "Management" stream handles both the live view and the setting area of
the web page on which the data is transferred via http/https protocol. If you
prefer to distribute more bandwidth when using the web browser to access the
camera, please adjust the Management stream.
44